Launch X431 O2-2 Scope Box allows the user to capture a particular waveform which makes the process 70% more dfficient as compared to other scopes. It features the ability to record and playback high-resolution waveform data for future analysis.
Launch X431 O2-2 Scope Box Highligts: 1. 4 channels
2. Bandwidth 100MHz
3. Auto configuration
4. Save waveforms with one click
5. Cursor measurement
6. One-click preset waveform parameter settings
7. Demo mode
8. Online help
9. Waveform math operations
10. 23 automatic measurements
11. Support work with LAUNCH X431 scanner, such as
X431 V 5.0 (PRO), X431 V+ 5.0 (PRO3), X431 PROS, X431 PRO3S+, X431 PRO ELITE, X431 PAD V, X431 PAD VII etc. (
Note: X431 V 4.0 and X431 V+ 4.0 do not support O2-2 ScopeBox)
12. 100% Launch official original guarantee. Launch O2-2 ScopeBox Features: 1. One key enable function
2. Access to 23 variants of automatic measurements that are displayed on one screen for an easy switch.
3. Buffer memory up to 50M.
4. Use the zoom in/out feature to review precise details
5. Customizable personal system settings that can be saved as configuration files for viewing
6. Self-calibration function allows optimization of the oscilloscope signal path for maximum measurement accuracy.
7. Magnifies waveform math operations, such as addition, subtraction, multiplication and FFT function for high level waveform analysis.
8. Multiple automotive tests that include circuits, sensors, actuators, ignition tests and more.
9. Multi language user interface.
10. USB Sync Data Transfer to external devices such as laptop, tablet, etc....
Launch O2-2 ScopeBox Functions: Supports multiple vehicle preset project tests Supports a variety of automotive preset project tests, such as circuits, sensors, actuators, ignition tests, communication tests and combination tests, and presets various parameters and specific connection methods for each test.
23 automatic measurement settings 23 automatic measurement settings are displayed on one screen, which is clear at a glance and can be clicked with a light touch. It supports one-click clearing, eliminating the tediousness of turning pages and searching multiple times, making automatic measurement easy to use and convenient.
Quick trigger source switching Supports edge, pulse and other triggers. Simple and intuitive trigger settings and fast trigger source switching methods make the most difficult part of oscilloscope application extremely easy.
Quickly create waveform preset parameters with one click When testing waveforms, you can save the existing settings on the current interface as waveform preset parameters with one click. When testing similar waveforms later, you can directly load the preset parameters without repeated settings.
Quickly save waveforms with one click Quickly save the waveform currently displayed on the screen with one click and automatically save it in the specified format. It can be directly used as a reference channel waveform for display later.
Convenient cursor operation Turn on the horizontal and vertical cursors with one click respectively. Each cursor can be dragged independently, and cursor tracking is also directly implemented through simple highlight touches, improving overall efficiency by more than 80%.
Support cursor/phase ruler changes accordingly When the waveform is zoomed in/out, the cursor and phase scale can change accordingly, keeping the measurement range unchanged.
Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally Drag horizontally or vertically with 2 points to zoom in or out the waveform horizontally or vertically.
Support demonstration function Preset sine waveforms to demonstrate common functions without connecting an oscilloscope.
Supports waveform math operations Supports addition, subtraction, multiplication and division calculations of two channel waveforms, in addition to fast Fourier transform.
Detailed Comparison Between Launch O2-2 Scope Box and Launch O2-1 Scope Box | Model | O2-1 | O2-2 |
| Channel | 4 | 4 |
| Bandwith | 100MHz | 100MHz |
| Rise Time | ≤3.5ns(typical) | ≤3.5ns |
| Maximum sampling rate | 1Gbps(for four channels) | 1Gbps |
| Input resistance | 1MΩ±1.5% | 1MΩ±1.5% |
| Storage depth | 50M | 10M |
| Number of sampling bits | 8bit | 8bit |
| vertical accuracy | 3% | 3% |
| Vertical gear | 5mV~10V | 5mV~10V |
| Inverting | Support | Support |
| Channel coupled | DC, AC | DC, AC |
| Time base gear | 5ns~1ks | 1ns-1ks |
| Time base accuracy | 20ppm | 20ppm |
| Sampling mode | Normal | Normal |
| CANBus decoding | CAN, LIN | CAN, LIN |
| Trigger type | Edge, Pulse width | Edge, Pulse width |
| Trigger mode | Normal, Auto and Single SEQ | Normal, Auto and Single SEQ |
| Trigger coupling | DC, Noise rejection | DC, Noise rejection |
| Math | Double waveFFT | Double waveFFT |
| Display | YTãZoomãRoll | YTãZoomãRoll |
| Roll mode | 200ms/div~1000s/div | 200ms/div~1000s/div |
| Auto configuration | Support | Support |
| Auto measurement | 23 | 23 |
| Cursor | Horizontal cursor, Vertical cursor | Horizontal cursor, Vertical cursor |
| Powered by | USB port, DC IN port | USB port, DC IN port |
| Data transmission method | USB | USB |
| Vehicle configuration options | Circuits, sensor, actuators, ignition | Circuits, sensor, actuators, ignition |
| Operating temperature | 0â~50â | 0â~50â |
| Power supply range | USB:5V/1A
DC:12V/24V | USB:5V/1A
DC:12V/24V |
| Compatibility | Different tablet resolutions require different APPs | One APP can be compatible with multiple tablet resolutions |
| Multi-touch gestures | No | Supports 2-point touch, the waveform can be zoomed in or out vertically or horizontally |
| Vehicle configuration | No | Each test project can support online help documentation (help documentation will be compiled according to needs later) |
| Firmware upgrade | Manual upgrade | Support online upgrade |
| Trigger | Waveform observation cannot be expanded during normal trigger waiting. | Can be used normally during normal trigger waiting. |
| Demo function | No | Yes |
| Split-screen | No | Yes |
| Sampling rate | Single channel 1G/s, more than 2 channels only 250M/s | Single channel 1G/s, 2 channels 500M/s, multiple channels 250M/s |
| Start time | 2-3S | about 16s |
| Power consumption | about 6W | about 7.5W |
How to Connect the Cables? Different application scenarios require different connection methods (no matter which application scenario, the following connections are required):
First, power the oscilloscope box through the double-clip power cable: Connect one end of the double-clip power cable to the power interface of the oscilloscope box, and the other end to the vehicle battery to draw power (red is connected to the positive pole, black is connected to the negative pole).
Note: * PADVII series tablets support USB power supply.
2. Connect the Type B terminal of the USB cable to the Type B interface of the oscilloscope, and connect the other end to the USB interface of the diagnostic device.
Package List: 1pc x Launch O2-2 main unit
4pcs x HT 30 test lines
1pc x HT25 secondary ignition pick-up line
1pc x battery clip cable
1pc x USB cable
2pcs x HT201 attenuator
20pcs x piercing needles
2 pairs x multimeter probes
2 pairs x crocodile clips
5pcs x colored 4 female probes
4pcs x clipper fuses(5*20mm)
2pcs x screw head
1pc x user manual
1pc x color label
1pc x packing list
Reviews
There are no reviews yet.